Posts Tagged ‘waterbed safety liner’

Fitting a replacement waterbed mattress

Monday, May 30th, 2011

Read along side our youtube video Link

1. Apologies for the poor quality of this video, but we have created this video to help our customers to fit a replacement waterbed mattress.

2. This is a particularly good example of a waterbed mattress that needs to be replaced. It is about ten years old and has not had conditioner added regularly. As a result the PVC has become very brittle and actually cracked. The brittling effect of the PVC causes the mattress to tighten up and shrink. This puts a tension in the surface of the waterbed mattress reducing the comfort and support. It is rare that a  mattress would get this bad because most people would have replaced it before it got to this condition as it is no longer giving the superb comfort and support that it did when it was new

3. Having established that the customer needs a replacement waterbed mattress we will need to empty the old one. First thing to do is unplug or disconnect the waterbed heater.
(more…)

Question and Answer for waterbed mattresses

Monday, May 9th, 2011

Question and Answer for waterbed mattresses

Found you on the web. Can you help?

I have a waterbed with softside support for the mattress.  It has thinner foam at the top of the mattress level and thicker at the bottom.  So the waterbed mattress has a larger rectangular area on the top where we lay, and smaller where the waterbed heater goes. It also has maximum restriction or stability, so no waves, so we do not disturb each other.

The waterbed mattress is 10 years old and I need a replacement . Can you supply / make one for that?  It is about 5’3″ wide on the top surface, maybe 4’11” at heater level.

Thanks Customers name Removed
(more…)

Choosing the QUALITY of your waterbed mattress

Friday, February 25th, 2011

Choosing the QUALITY of your waterbed mattress

We all know that spring and foam mattresses give a relatively short period of supportive life before they begin to sag. A waterbed mattress however can last much longer, cost much less and give better support.

Standard waterbed mattress range:

*made from thinner vinyl than our deluxe range of waterbed mattresses.

*Cut smaller to reduce material cost.

*Made from a lower cost general purpose vinyl.

*Comes with a standard two year guarantee.

*Life expectancy, four years.

Deluxe waterbed mattress range

*£50 More expensive than our standard range of  mattresses.

*Made from thicker vinyl than our standard range.

*Generously cut to fit, ensuring perfect support.

*Made with vinyl specifically developed for waterbed mattresses.

*Comes with a standard five year guarantee.

*Life expectancy, eight years plus.

 

Why do we sell two qualities of waterbed mattress? (more…)

This particular waterbed is shown in 6’ (1.8m) width

Saturday, November 20th, 2010

This waterbed shown below was installed recently in Hampshire. From our Olymia range, the Olympia Deluxe soft sided water bed is shown with the Karma Hi-Line headboard however you may choose any of our full range of headboards. A drawer unit is a good idea, giving valuable storage. This particular waterbed is shown in 6’ (1.8m) width, this is super king size in English sizes also known as King size in America. Shown with a super motionless one second or 95% stable waterbed mattress 

Olympia Deluxe Waterbed

Olympia Deluxe Waterbed

From our build a waterbed feature http://www.bed-adjustable.co.uk/build-a-waterbed/  Options chosen were; (more…)

Waterbed Heater

Monday, September 27th, 2010

Waterbeds are temperature controlled.

We are back from holiday in freezing cold England.  It is very nice to get back to a warm comfortable bed. As you know waterbeds are temperature controlled, see our waterbed accessories for more details.

Waterbed Heater

Waterbed Heater

If you have an existing hardside or softside waterbed and need to replace the old heater, this can be done without emptying the water mattress. Please read the blog and watch our video.

If you require a replacement waterbed heater you can buy online and we will send by next day carrier.

Every waterbed must have a heater. Without it the temperature of the bed would drop below a comfortable temperature. The heater is low power generally between 220w and 350w
(more…)